150A Bi-directional Single Phase Smart Meters You May Like
Bi-directional Two Way WIFI 150A WIFI Meter with current transformer
We guarantee good quality, every product will be tested before delivery.
Note before Order
1. It’s high Amp item, and the device needs certified and professional electrician for wiring.
2.The frequency of the wireless router is 2.4GHz.
3. The meter requires the measured device must have neutral wire. otherwise it can’t measure the device’s voltage, current, and power
Clamp Diameter
80A: 10mm
120A: 16mm
200A: 20mm
300A: 24mm
500A: 36mm
When you install the CT , please note the CT’s direction, make sure all 3 CT with the same direction.
Please follow the arrow’s direction
With External Antenna for Strong and Stable Signal
3 phase wiring diagram and single phase wiring diagram
You can choose the wiring connection according to your need, please refer to below.
Please make sure the main power is off when you make the connection
Main Features
• Single/3 – phase electricity compatible
• Three current transformers for Single phase application
• Measures real-time Voltage, Current, PowerFactor, ActivePower and
total energy consumption
• Display the temperature of the device on the App
• Suitable for both residential and commercial application
Important safety information:
• The power clamp must be installed and serviced only by a qualified
electrical personnel.
• Do not touch the terminals of the device during testing.
• Turn off all the power supply for this equipment before installing.
• Always use a properly rated voltage sensing device to confirm power is off.
• Replace all devices, doors and covers before applying power to the
equipment.
Failure to follow these instructions will result in death or serious
injury.
For 80A-300A CT item, Real time monitor total current, power and KWh , and also show A, B, C each phase voltage , current, power and KWh consumption
For 80A-300A CT item, electric stastic , it can record hourly , daily, monthly and yearly power consumped KWh value for Total and each phase separately
Press and hold the reset button for 5 seconds until the LED indicator flashes 3 times quikly to restore factory settings (energy data will be cleared). And it will get into EZ mode for 3 minutes.
Reviews
There are no reviews yet.